Marantz CD Player SA8001 User Manual

Model SA8001 User Guide  
Super Audio CD Player  
CLASS 1 LASER PRODUCT  
LUOKAN LASERLAITE  
KLASS 1 LASERAPPARAT  
1
 
on, the user is encouraged to try to correct the  
interference by one or more of the following  
measures:  
NOTE:  
IMPORTANT SAFETY  
This equipment has been tested and found to  
comply with the limits for a Class B digital  
device, pursuant to Part 15 of the FCC Rules.  
These limits are designed to provide reason-  
able protection against harmful interference in  
a residential installation. This equipment gen-  
erates, uses and can radiate radio frequency  
energy and, if not installed and used in accor-  
dance with the instructions, may cause harmful  
interference to radio communications. How-  
ever, there is no guarantee that interference  
will not occur in a particular installation. If this  
equipment does cause harmful interference to  
radio or television reception, which can be  
determined by turning the equipment off and  
INSTRUCTIONS  
Reorient or relocate the receiving antenna.  
Increase the separation between the equip-  
ment and receiver.  
READ BEFORE OPERATING EQUIPMENT  
This product was designed and manufactured to meet strict quality and safety standards. There are,  
however, some installation and operation precautions which you should be particularly aware of.  
Connect the equipment into an outlet on a  
circuit different from that to which the re-  
ceiver is connected.  
1. Read these instructions.  
2. Keep these instructions.  
Consult the dealer or an experienced radio/  
TV technician for help.  
3. Heed all warnings.  
4. Follow all instructions.  
NOTE:Changes or modifications may cause  
this unit to fail to comply with Part 15 of the  
FCC Rules and may void the user's authority  
5. Do not use this apparatus near water.  
6. Clean only with dry cloth.  
7. Do not block any ventilation openings. Install in accordance with the manufacture's instructions.  
to operate the equipment.  
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus  
(including amplifiers) that produce heat.  
This Class B digital apparatus complies  
with Canadian ICES-003.  
Cet appareil numérique de la Classe B est  
conforme á la norme NMB-003 du Canada.  
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has  
two blades with one wider than the other. A grounding type plug has two blades and a third  
grounding prong. The wide blade or the third prong are provided for your safety. If the provided  
plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.  
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience  
receptacles, and the point where they exit from the apparatus.  
11. Only use attachments/accessories specified by the manufacturer.  
12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with  
the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to  
avoid injury from tip-over.  
13. Unplug this apparatus during lightning storms or when unused for long periods of time.  
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has  
been damaged in any way, such as power-supply cord or plug is damaged, liquid has been  
spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or  
moisture, does not operate normally, or has been dropped.  
Additional Safety Information!  
This product should not be placed in a built-in installation such as a bookcase or rack unless  
proper ventilation is provided or the manufacturers instructions have been adhered to.  
Apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids,  
such as vases, shall be placed on the apparatus.  
When the switch is in the OFF position, the apparatus isnt completely switched-off from the  
MAINS.  
 
CONTENTS  
FOREWORD  
This section must be read before any connection is  
made to the mains supply.  
FOREWORD ........................................ 1 OPERATION ........................................ 9  
EQUIPMENT MAINS WORKING SETTING .. 1  
COPYRIGHT ................................................. 1  
CONNECTING THE POWER SUPPLY ......... 9  
NORMAL PLAYBACK .................................... 9  
START SOUND MODE................................ 10  
EQUIPMENT MAINS WORKING  
SETTING  
INTRODUCTION.................................. 2  
PRODUCT FEATURES ................................. 2  
ABOUT SUPER AUDIO ................................. 2  
PLAYING CD-RW DISCS .............................. 2  
APPLICABLE DISCS TO THE UNIT.............. 2  
PLAYING YOUR FAVORITE TRACKS OF A  
DISC ........................................................ 10  
Your Marantz product has been prepared to comply  
with the household power and safety requirements  
that exist in your area.  
PLAYING YOUR FAVORITE PARTS OF A  
DISC (SEARCH) ...................................... 10  
SA8001 can be powered by 120V AC only.  
REPEATED DISC PLAY (REPEAT PLAY) ... 10  
COPYRIGHT  
BEFORE USING .................................. 2  
PLAYING TRACKS IN A RANDOM  
Recording and playback of any material may require  
consent. For further information refer to the following:  
NOTES ABOUT THE DISCS ......................... 2  
SEQUENCE (RANDOM PLAY) ............... 10  
Copyright Act 1956  
INAPPROPRIATE PLACES FOR INSTALLATION ..  
3
PLAYING TRACKS IN A SPECIFIC  
Dramatic and Musical Performers Act 1958  
Performers Protection Acts 1963 and 1972  
Any subsequent statutory enactments and  
orders  
SEQUENCE (PROGRAM PLAY) ............. 11  
PRECAUTIONS ............................................. 3  
USING REMOTE CONTROL UNIT ............... 3  
LOADING BATTERIES .................................. 3  
SEARCHING YOUR FAVORITE TRACKS  
(AMS (AUTOMATIC MUSIC SCAN) PLAY) .. 11  
QUICK REPLAY .......................................... 11  
ABOUT THE TEXT INFORMATION DISPLAY ... 12  
TIMER PLAY ................................................ 12  
NAMES AND FUNCTIONS ................. 4  
FRONT PANEL .............................................. 4  
REMOTE CONTROLLER .............................. 5  
REAR PANEL ................................................ 6  
DISPLAY ........................................................ 7  
TROUBLE SHOOTING ...................... 12  
SPECIFICATIONS ............................. 13  
CONNECTIONS................................... 8  
1
 
ABOUT SUPER AUDIO  
Disc Types  
Hybrid-layer Disc  
CD layer HD layer  
Dual-layer Disc  
HD layer  
INTRODUCTION  
Thank you for selecting the Marantz SA8001 Super  
Audio CD Player for your Audio system.  
This Player incorporates a number of features  
designed to enhance the listening of your favorite  
audio sources.  
Please read these operating instructions carefully.  
We recommend that you read the entire user guide  
before you attempt to connect or operate the player.  
After you have reviewed the contents of this  
manual,we suggest that you make all system  
connections before you attempt ttêoperate the unit.  
BEFORE USING  
Single-layer Disc  
The Super Audio standard is based on Direct Stream  
Digital (DSD) technology. This new direct-stream  
digital format comprises a 1-bit system that has a  
digital sampling frequency that is 64 times higher  
than that of conventional audio CD. The results are  
spectacular: a frequency response of over 100k Hz  
and a 120 dB dynamic range over the entire audible  
spectrum. Mixed with as many of the original  
frequencies as possible, the audio information  
audible for human ears sounds much more natural.  
All audible frequencies are, after all, embedded in  
the frequency range as emitted by the sound source.  
A better reproduction does not exist! For the first time  
your ears will relive reality.  
NOTES ABOUT THE DISCS  
HD layer  
* Handle the discs carefully so as not to scratch  
their surfaces.  
* Keep the surfaces of the discs clean at all times.  
When cleaning the surfaces of discs, always be  
sure to use the special cleaner and wipe the  
surfaces in the directions shown in the figure below.  
And each type may contain two areas of recorded  
information.  
High quality stereo area  
High quality multi-channel area**  
Single Layer Disc  
It can contain both high quality stereo area and  
high quality multi-channel area** information.  
PRODUCT FEATURES  
Dual Layer Disc  
This unit can playback the outstanding sound  
performance in Super Audio CD. This unit has the  
following unique features.  
PLAYING CD-RW DISCS  
It can contain both high quality stereo area and  
high quality multi-channel area** information. And  
a double amount of information can be stored on  
the disc thanks to the second layer.  
Do not wipe the surface in  
t h e c i r c u m fe r e n t i a l  
direction.  
Wipe the surface  
radially from the  
center.  
This unit can play back the CD-RW (ReWritable)  
discs as well as ordinary Audio CD and CD-R  
(Recordable) discs.  
Low-noise low-distortion filter circuit and high-  
speed current-feedback-type output amplifier with  
the differential input type HDAM.  
* Do not attach pieces of paper or stickers to the  
label surfaces of the discs.  
Hybrid Layer Disc  
The CD-R and CD-RW discs should contain  
properly-recorded TOC information so that they  
can be played back. In CD recorders, the task of  
writing TOC information is referred to as finalizing  
the disc. Discs that are not finalized cannot be  
properly recognized as an Audio CD and played  
back by regular CD players and Super Audio CD  
players. For details, please read the instruction  
manual provided with a CD recorder.  
Not only does this disc contain both high sound  
quality stereo area and high sound quality multi-  
channel area** information, it also has a CD layer  
in the second layer, so it can be played on a CD  
player.  
Text information display function that can display  
disc titles, track titles etc. in Super Audio CD.  
When a disc has a piece of plastic tape or rental  
CD label with paste protruding from the edge or  
when a disc still bears traces of sticky tape or  
adhesive labels, do not attempt to play it. If such a  
disc is played on the CD player, you may find that  
you cannot remove it or that some other kind of  
malfunctioning may occur.  
CD-R/CD-RW discs can be played.  
Newly Developed Toroidal Transformer  
A newly developed Toroidal power transformer,  
which produces less vibration and magnetic  
leakage flux than previously, has been  
incorporated. The materials and manufacturing  
process of the ring-shaped core are strictly  
controlled to reduce vibration, while the short-ring  
attached to the perimeter of the transformer  
reduce magnetic leakage flux.  
Hybrid Super Audio  
CD Disc  
* TOC stands for Table Of Contents and contains  
information such as the total number of tracks  
and total playing time of the disc.  
1
CD layer that plays on any of your  
existing CD players  
High-Density layer containing:  
- High sound quality stereo  
High sound quality multi-channel**  
This unit can play only the discs recorded in the  
CD-DA format designed for music reproduction.  
Do not attempt to play a disc containing other  
data, such as a CD-ROM for PCs, on this unit.  
2
3
-
Large Capacitance Block Capacitor  
A large capacity 3300µF block capacitor is  
incorporated into the power supply circuit.  
* Do not use discs which come in special shapes.  
Do not attempt to play heart-shaped or octagonal  
discs or discs with any other special shapes. You  
may find that you cannot remove them or that some  
other kind of malfunctioning may occur in the player.  
As the playback of a CD-RW disc necessitates  
partial change of the player setup, it may take  
longer time for reading the TOC information than  
when an Audio CD or CD-R disc is played.  
The number of tracks recorded may vary per layer. It  
will be shown on the display window of the unit.  
Film capacitors and electrolical capacitors etc.  
The capacitors used in high end models are  
incorporated into the SA8001 Super Audio CD  
player.  
** This unit is a stereo-only player, and so it cannot  
play high-quality multi-channel audio areas. (It  
does not recognize multi-channel areas.)  
APPLICABLE DISCS TO THE UNIT  
Copper-coated Chassis  
High Grade Audio Output Terminal  
1. Super Audio CD  
2. Audio CD (CDDA)  
* Use discs which satisfy the CD standards such  
as those with the “CD logo” or “  
their disc label surfaces.  
No guarantees are made for playback if discs which  
do not satisfy the appropriate CD standards are  
used.  
Similarly, no guarantees are made for their sound  
quality even if it is possible to play such discs.  
” mark on  
There are three types of Super Audio CDs.  
Audio CDs contain music tracks only.  
Single-layer Disc  
Dual-layer Disc  
Hybrid-layer Disc  
2
 
* To protect your discs from damage, avoid  
placing them in the following locations.  
Where they will be exposed to direct sunlight or  
where they will be close to a heater or other heat-  
radiating appliance  
Where the humidity level is high or it is very dusty  
Near a window or other such location where they  
may be exposed to rain  
w Insert the batteries with correct +/orientation.  
7 Do not place objects on top  
USING REMOTE CONTROL UNIT  
Two AAA-size batteries  
Refrain from placing any objects on top of the  
player.  
Cautions on handling batteries  
Misuse of the batteries can result in electrolyte  
leakage, rupturing, corrosion, etc.  
Bear in mind the following points when using  
batteries.  
7 Cautions on handling power cord  
Do not touch the power cord with wet hands.  
* Get into the habit of putting the discs back in  
their cases after use.  
Remove the batteries from the remote control  
unit if the unit is not going to be used for a  
prolonged period (a month or more).  
When disconnecting the power cord, always make  
sure that you take hold of the plug. Yanking out  
or bending the cord can damage it and/or cause  
electric shocks or a fire.  
INAPPROPRIATE PLACES FOR  
INSTALLATION  
Do not use an old battery together with a new  
one.  
Get into the habit of disconnecting the power plug  
before leaving home.  
To keep your player in perfect working order for the  
longest possible time, avoid installing the player in  
the following locations.  
Insert the batteries while ensuring that their  
and  
poles are properly aligned with  
e Close the battery cover until it clicks shut.  
the corresponding markings on the remote  
control unit.  
7 Do not attempt repairs yourself  
Wherever it will be exposed to direct sunlight  
Batteries with the same shape may have  
different voltages. Do not use different types  
of batteries together.  
Wherever it will be close to a heater or other heat-  
radiating appliance  
Refrain from lubricating the player: doing so can  
cause malfunctioning.  
Wherever the humidity is high or ventilation is poor  
Wherever it is very dusty  
Only qualified engineers with specialized  
expertise are authorized to repair the pick-up and  
parts inside the player.  
If electrolyte has leaked, thoroughly wipe the  
inside of the battery compartment, and then  
insert new batteries.  
Wherever it will be subject to vibration  
On top of a rickety stand or in an unstable location  
which is tilted at an angle  
When batteries which are no longer required  
are to be discarded, follow the directions  
(regulations) laid down by the local authorities  
in the area concerned for their disposal.  
PRECAUTIONS  
In an audio rack with little space at the top and  
bottom or other location where the heat  
dissipation will be obstructed  
In winter, droplets of water form on the insides of  
the windows of a heated room: this is called  
condensation. This player uses an optical lens,  
so the condensation may form in the following  
cases.  
To ensure proper heat dissipation, install the  
player while leaving clearances between the  
player and wall or other components, as shown  
in the figure below.  
7 Remote control  
-
In a room immediately after the heating has  
been turned on  
Operate the remote control unit (RC8001SA) within  
a distance of approx. 5 m from the infrared signal  
reception window (remote sensor) on the front of the  
Super Audio CD player.  
Remote control operation may not be possible if the  
remote control units transmitter is not pointing in the  
direction of the remote sensor or if there is an  
obstruction between the transmitter and the remote  
sensor.  
LOADING BATTERIES  
On top of an amplifier or other component which  
dissipates a great deal of heat  
-
-
In a room where the humidity level is high  
When the player has been suddenly brought  
from a cold location into a warm room  
Batteries in this remote control unit have a life of  
approximately 1 year under normal operating  
conditions. If the remote control unit is not going to  
be used for an extended period of time, remove the  
batteries. Also, if you notice that the batteries are  
starting to run down, replace them as soon as  
possible.  
* The quality of the laser and other components  
can be harmed if the player is placed directly  
on top of an amplifier or other device which  
generates heat.  
Since, in cases like this, the track numbers may  
not be read and the player is prevented from  
operating properly, wait about 30 minutes, and  
then operate the player.  
Above 4 ins. (0.1 m) or  
more  
This player may cause interference on a tuner or  
TV set. If this is the case, place it further away  
from the tuner or TV set.  
Left 4 ins. (0.1 m) or  
more  
Remote control operating range  
Right 4 ins. (0.1 m) or  
more  
q Remove the battery cover.  
SUPER AUDIO CD PLAYER SA8001  
RNDM  
PROG  
TRK  
A
ALL  
B
AMS  
SING  
1
TOTAL  
REMAIN  
SACD  
TEXT  
1
2
3
4
5
6
7
8
9
10  
1
1
1
2
1
3
1
4
1
5
1
6
1
7
1
8
1
9
2
0
STEREO  
D
I
S
P
L
A
Y
O
F
F
T
E
X
T
T
I
M
E
S
O
U
N
D
M
O
D
E
POWER ON/OFF  
Compact discs have much less noise than analog  
records and hardly any noise is heard before play  
starts. Bear in mind, therefore, that if the volume  
control on the amplifier is set too high, you will  
risk damaging other audio components.  
Approx.  
16.4 ft. (5m)  
Rear 4 ins. (0.1 m)  
or more  
This player is designed to play Super Audio CD  
and normal Audio CDs only. It cannot play CD-  
ROMs used with personal computers, game CDs,  
video CDs or DVDs (video/audio).  
We do not recommend the use of lens cleaners.  
Remote control unit (RC8001SA)  
3
 
NAMES AND FUNCTIONS  
FRONT PANEL  
c
v
⁄ . , m  
SUPER AUDIO CD PLAYER SA8001  
RNDM  
PROG  
TRK  
A
ALL  
B
AMS  
SING  
1
TOTAL  
REMAIN  
SACD  
TEXT  
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19 20  
TIME  
STEREO  
DISPLAY OFF  
TEXT  
SOUND MODE  
POWER ON/OFF  
z
x ¤ ⁄ ⁄ b  
⁄n⁄  
z POWER ON/OFF switch  
n
,
,
STOP button  
Press this button to stop playback. Also this  
button is used to clear all programs.  
button  
DISPLAY  
This button is used to turn lighting ON and OFF  
of the display window.  
Pressing this button once darkens the display.  
The third time this button is pressed, the display  
will be extinguished and the indicator in ¤lights.  
This switch is used to turn the power ON and  
OFF. When it is pressed, the display window  
lights up, and the power comes on. When it is  
pressed again, the display window is  
extinguished, and the power goes off.  
(Track Skip/Search buttons)  
These buttons can be used as both track skip  
and track search buttons. (The buttons on the  
main unit only.)  
.
PLAY button  
Press this button to start playback.  
: Each time this button is pressed, the  
track being played is skipped  
forward. When this button is held  
down, tracks are searched forward  
(Fast Forward).  
: When this button is pressed, the unit  
goes back to the beginning of the  
current track. If the button is pressed  
more times, the track being played  
is skipped back. When this button is  
held down, tracks are searched  
backward (Fast Rewind).  
x Disc tray  
button  
TIME  
OPEN/CLOSE  
button  
The disc to be played is placed on the tray.  
This button is used to switch from the text display  
to the time display when using a text-compatible  
Super Audio CD. It is also used to change the  
time display. Each time that it is pressed, the  
displayed time cycles from track elapsed time  
track remaining time total remaining time  
track elapsed time . (See page 9)  
Press this button to open the tray. Put on a disc  
label side up. Press the button again to close  
the tray.  
* Close the tray by pressing the operation button,  
not by pressing it in with your hand.  
c Remote sensor  
PHONES (headphones)jack  
The headphones are connected to this jack.  
* Use headphones with a standard plug.  
The infrared control signal emitted from the  
remote control unit are sensed here.  
In program play, Fast Forward and Fast Rewind  
can be done in the playing track only.  
button  
TEXT  
v Display window  
This button is pressed to switch the main screen  
from the time display to the text display when  
using a text-compatible Super Audio CD. (See  
page 12)  
LEVEL (headphone volume) control  
This screen shows the operating status.  
This control is used to adjust the headphone  
volume.  
Turn it clockwise to increase the headphone  
volume.  
m
PAUSE button  
Press this button to pause playback. If pressed  
again, the unit returns to playback.  
SOUND MODE  
b
button  
Press this button to select the Super Audio CD  
sound mode. Super Audio CD (stereo) or Audio  
CD (if discs are supported) (See page 9)  
¤ DISPLAY OFF indicator  
This indicator turns on when the display screen  
is turned off (Off mode).  
4
 
SOUND MODE  
SCROLL/RECALL  
b
m
,
.
button  
¤
button  
¤
¤
,
button  
REMOTE CONTROLLER  
Use this button to scroll text while displaying text  
information in a Super Audio CD disc that  
supports TEXT.  
This button is also used for checking the  
programmed tracks during a program or when a  
program is stopped. (See page 11)  
These buttons can switch between devices  
compatible with Marantz receivers. Refer to the  
receiver instruction manual for further details.  
PAUSE button  
STOP button  
OPEN/  
CLOSE  
SOUND  
MODE  
PLAY button  
,
button  
b
These buttons can adjust the volume of devices  
compatible with Marantz receivers. Refer to the  
receiver instruction manual for further details.  
OPEN/CLOSE button  
¤
¤
¤
CANCEL  
¤
¤
button  
button  
DISPLAY  
AMS  
A - B  
RANDOM  
Use this button to cancel a programmed track.  
(See page 11)  
¤
button  
TIME  
TEXT  
SCROLL/  
RECALL  
PROGRAM  
CANCEL  
TEXT  
MUTE  
button  
This button can activate the mute function of  
devices compatible with Marantz receivers. Refer  
to the receiver instructions for further details.  
¤
button  
A-B  
(A-B Repeat button)  
DISPLAY  
TIME  
The buttons listed above are the same to the  
buttons on the front panel of the main unit.  
Please see the correspond items in “Front Panel”  
section.  
This button is to determine starting and ending  
points for A-B repeat play. (See page 10)  
RANDOM  
¤
¤
button  
This button is for random play. (See page 10)  
INPUT  
MUTE  
VOLUME  
Q.REPLAY  
¤
¤
-
(Numerical buttons)  
0
9
Use these buttons to select tracks directory.  
AMS  
button)  
(Automatic Music Scan  
¤
m
REPEAT  
¤
.
PROGRAM button  
This button is for program play. (See page 11)  
Use this button for AMS play. (See page 11)  
REPEAT  
¤
button  
,
(Track skip buttons)  
This button is for repeat play. Each time this  
button is pressed, repeat mode changes as  
follows.All RepeatTrack RepeatRepeat  
Off(See page 10)  
,
: When this button is pressed, the unit goes  
back to the beginning of the current track.  
If the button is pressed more times, the  
track being played is skipped back.  
1
4
2
5
8
0
3
6
: Each time this button is pressed, the track  
being played is skipped forward.  
MENU  
button and  
(Menu setup)  
These buttons are used to set the time for quick  
replay. (See page 11)  
ENTER  
button  
¤
¤
* Search buttons are provided separately for the  
remote control unit. Use Search buttons for  
search function.  
7
9
MENU  
ENTER  
¤
,
(Search buttons)  
Q.REPLAY (Quick replay) button  
This button is used to do quick replay of the  
tracks. (See page 11)  
: While this button is pressed during  
playback, tracks are searched backward.  
: While this button is pressed during  
playback, tracks are searched forward.  
REMOTE CONTROLLER  
RC8001SA  
* In this instruction manual, some operations can only be performed with the remote control. For operations that can be performed with buttons both on the  
main unit and on the remote control, the button names are shown in the  
remote control, the button names are shown in the mark.  
mark. And for operations that can only be performed with buttons on the  
5
 
REAR PANEL  
F
ANALOG OUTPUT  
L
R
AC IN  
DIGITAL AUDIO OUT  
OPT. COAX.  
REMOTE CONTROL  
IN  
EXT.  
INT.  
OUT  
A
B C D  
E
A
ANALOG OUTPUT connectors  
D REMOTE CONTROL IN, OUT (input F AC POWER INPUT JACK  
These are the output jacks of the analog audio  
signals.The supplied analog connection cord can  
be connected to the CD, AUX, or other  
connectors on an amplifier. Be sure to connect  
the L and R channels correctly to the  
corresponding jacks.  
and output) connectors  
Connect the supplied power cord to this jack and  
a household AC power outlet.  
When the remote control connectors on the  
player and on a Marantz AV component are  
connected using the accessory remote control  
connecting cables, the components can be  
operated as a system by remote control.  
* Never connect to the PHONO connector on the  
amplifier.  
When connecting to a component which is  
equipped with remote control connectors, the  
players REMOTE CONTROL IN connector  
must always be connected to the REMOTE  
CONTROL OUT connector on the other  
component to be connected.  
When connecting a component which is not  
equipped with an infrared remote sensor, this  
component must always be connected to the  
players REMOTE CONTROL OUT connector.  
B DIGITAL AUDIO OUT OPT.  
It outputs the playing Audio CD signal in digital  
format. This jack is to be connected with a  
recording device, amplifier, D/A converter, etc  
that has optical digital input using an optional  
square type optical digital cable.  
* No signal will be output when a Super Audio  
CD is played.  
E EXT./INT. (Ext./Internal switch)  
When this unit is used as a standalone  
component, set this switch to the INT. side.When  
it is used connected to external component by a  
remote connecting cable and to audio  
component with a remote sensor that supports  
remote controls by Marantz, set this switch to  
the EXT. side.  
C DIGITAL AUDIO OUT COAX.  
It outputs the playing Audio CD signal in digital  
format. This jack is to be connected with a  
recording device, amplifier, D/A converter, etc  
that has coaxial digital input using an optional  
coaxial digital cable.  
* If the unit is used as standalone and the  
switch is set to EXT. position, remote control  
unit cannot be used.  
* No signal will be output when a Super Audio  
CD is played.  
6
 
DISPLAY  
c d ef g  
hi jk l m  
RNDM  
PROG  
TRK  
A
ALL  
B
AMS  
SING  
1
TOTAL  
REMAIN  
SACD  
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19 20  
STEREO  
a
b
a Main display  
g
, ALL, 1 (repeat) indicator  
The time display and text information of the disc  
to be played as well as the setting menus and  
other displays appear on the main display.  
This lights during repeat play.  
h TOTAL (total time) indicator  
When the total remaining time or the total  
program time is displayed, this lights above the  
display.  
b 1-20,  
(music calendar)  
The number of tracks recorded on the disc to be  
played, the number of remaining tracks to be  
played, and the number of tracks programmed  
by program play appear here. “ ” light when  
21 or more tracks have been recorded on the  
disc.  
i AMS (auto music search) indicator  
This lights during AMS playback.  
j SING indicator  
c RNDM (random) indicator  
This lights when the remaining time of the track  
now playing is displayed.  
This lights during random play.  
d PROG (program) indicator  
k 8 (pause) indicator  
This lights during program play.  
This lights when play is paused (temporarily  
stopped).  
e TRK (track) indicator  
l 3 (play) indicator  
This lights above the display of the track number  
now playing, for instance.  
This lights during disc play.  
f A-B (A-B repeat) indicator  
m CD, SACD, STEREO Disc indicator  
This lights during A-B repeat play.  
This indicates the type of disc on the disc tray.  
7
 
CONNECTIONS  
Depending on your amplifier/receiver/Stereo System, there are various ways to connect to this player. For  
correct connection please refer to instruction manuals of stereo system to be connected.  
Caution: Do not connect output from this unit to PHONO input of your audio system.  
1. Connect the audio cable q to this units front speaker outputs and the stereo inputs on your amplifier,  
receiver or stereo system.  
2. Connect the optical cable w, coaxial cable eto the digital input on your AV amplifier, D/A converter, CD-  
R, etc..  
* Signal will be output from the digital audio out jacks (OPT./COAX.) only when an Audio CD disc is played.  
No signal is output when playing a Super Audio CD.  
To Analog Audio output  
(white)  
(red)  
ANALOG OUTPUT  
L
R
AC IN  
DIGITAL AUDIO OUT  
REMOTE CONTROL  
OPT. COAX.  
IN  
EXT.  
INT.  
OUT  
To Digital Audio  
output  
e
(Optional)  
w
(Optional)  
Audio cable q  
(Supplied)  
To audio input  
terminals on amplifier  
Connect to digital input  
INTEGRATED AMPLIFIER  
INPUT SELECTOR  
VOLUME  
terminals of receiver, D/A  
converter or CD recorder,  
etc..  
PHONO  
CD  
TUNER  
AUX/DVD  
1
RECORDER  
2
MUTE  
STANDBY  
REC SELECTOR  
OFF  
BASS  
TREBLE  
BALANCE  
MIN  
SPEAKERS  
MAX  
1
2
SOURCE DIRECT  
TUNER  
AUX/DVD  
CD  
POWER ON/OFF  
PHONES  
PHONO  
ON  
OFF  
ON  
OFF  
RECORDER  
2
1
COPY  
RECORRDER2  
1
2
+
+
-
-
L
R
Left  
Right  
speaker speaker  
8
 
To start playback form the first track  
Press  
PLAY button.  
7 Switching Sound Mode  
OPERATION  
(Super Audio CD)  
To stop playback  
STOP  
SUPER AUDIO CD PLAYER SA8001  
RNDM  
PROG  
TRK  
A
ALL  
B
AMS  
SING  
Press  
button.  
* In this instruction manual, some operations can only be performed with the remote control. For  
operations that can be performed with buttons both on the main unit and on the remote control, the  
1
TOTAL  
REMAIN  
SACD  
TEXT  
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19 20  
STEREO  
D
I
S
P
L
A
Y
O
F
F
T
E
X
T
T
I
M
E
S
O
U
N
D
M
O
D
E
POWER ON/OFF  
button names are shown in the  
buttons on the remote control, the button names are shown in the  
mark. And for operations that can only be performed with  
To eject disc  
Press  
OPEN/CLOSE button to open the disc tray  
mark.  
and take the disc off. Press the button again to close  
the tray.  
SOUND MODE  
Button  
Disc tray must be closed when the unit is not be  
used.  
CONNECTING THE POWER  
SUPPLY  
q Press POWER switch to turn on.  
Display  
SOUND MODE  
q Press  
button in stop  
To pause playback  
1 Plug the power cable into AC IN jack on the back  
mode (not playing).  
Press  
PAUSE button.  
panel.  
The currently selected layer or area is shown on  
the display. (CD or Super Audio CD)  
PAUSE indicator will light and playback is paused at  
the point that the button is pressed. To restart  
SOUND MODE  
If  
button is pressed again, a  
playback, press  
button.  
PAUSE button again or press  
playable layer or area will be shown, and the layer  
or area will be switched to new one.  
PLAY  
The display cycles from TOC Reading No  
Disc (when no disc is loaded) Super Audio  
CD (when the start sound mode setting is Super  
Audio CD).  
* When layer or area is switched, TOC will be  
read again.  
To change time display  
TIME  
AC IN  
Press the  
Each time  
button on the remote control.  
* The sound mode cannot be changed for Audio  
CDs and discs with only a Super Audio CD  
area.  
TIME  
button is pressed, display will  
change in the following order. Track elapsed time”  
Track remaining timeTotal remaining time”  
Track elapsed time.  
w Press the  
OPEN/CLOSE button  
* The sound mode on hybrid layer discs will be  
changed in the following order.  
The disc tray comes out. Place the disc with label  
side up on the tray.  
Super Audio CD stereo area CD layer →  
Super Audio CD stereo area  
To play a single (8cm) CD, place the disc with  
the indentation at the center of the tray.  
Track remaining time  
(The remaining playing time from the playing  
point to the end of the current track)  
* Sound mode can be selected while the tray is  
open. Select a desired layer or area and press  
2 Turn on the power switch of the audio unit  
(amplifier, etc.) that is connected with this unit.  
Set the selector on the connected unit to this unit.  
e Press  
r Press  
OPEN/CLOSE button.  
button then the tray will close and  
PLAY  
SING REMAINis displayed  
“–” is displayed  
playback will be started.  
PLAY button.  
3 Plug the power cable into an AC outlet.  
Disc type is automatically detected and playback  
is started. Track number and track elapsed  
time(minute, second) appear on the display.  
SOUND MODE  
w Press the  
button  
RNDM TRK  
PROG  
A
ALL  
B
AMS  
1
TOTAL SING REMAIN  
SACD  
during playback.  
TEXT  
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19 20  
STEREO  
The currently selected layer or area is shown on  
the display. (CD or Super Audio CD)  
* For Super Audio CD/CD hybrid-layer discs (See  
page 2), the layer that is set in the start sound  
mode (See page 10) is played. To change the  
layer, use the  
9)  
NORMAL PLAYBACK  
SOUND MODE  
If  
button is pressed again, the  
Total remaining time  
SOUND MODE  
playback is stopped, and the layer or area will  
be switched to new one.  
When you want to listen at that area, press  
button. (See page  
7 Super Audio CD player playback  
(The remaining playing time from the playing  
point to the end of the last track)  
button again. The playback will be  
(Exp.:Track 6, Elapsed time 2 min 8 sec)  
PLAY  
started.  
TOTAL REMAIN”  
is displayed  
SUPER AUDIO CD PLAYER SA8001  
Number of current track Minutes Seconds  
“–” is displayed  
RNDM  
PROG  
TRK  
A
ALL  
B
AMS  
SING  
1
TOTAL  
REMAIN  
SACD  
TEXT  
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19 20  
STEREO  
D
I
S
P
L
A
Y
O
F
F
T
E
X
T
T
I
M
E
S
O
U
N
D
M
O
D
E
RNDM TRK  
PROG  
A
ALL  
B
AMS  
1
TOTAL SING REMAIN  
SACD  
RNDM TRK  
PROG  
A
ALL  
B
AMS  
POWER ON/OFF  
1
TOTAL SING REMAIN  
SACD  
TEXT  
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19 20  
STEREO  
TEXT  
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19 20  
STEREO  
Remaining track numbers  
TIME  
* If  
button is pressed when Super Audio CD  
q
w, e r  
disc that supports text is in use, time display is given  
priority and the text information will not be displayed  
until the next track.To see the text information, press  
Playback automatically stops at the end of the  
final track.  
TEXT  
button.  
9
 
START SOUND MODE  
PLAYINGYOUR FAVORITE  
TRACKS OF A DISC  
REPEATED DISC PLAY  
(REPEAT PLAY)  
PLAYING TRACKS IN A RANDOM  
SEQUENCE (RANDOM PLAY)  
When a Super Audio CD hybrid layer discs that has  
both a Super Audio CD high sound quality stereo  
area and an Audio CD area information are to be  
played, this player makes it possible to set the layer/  
area (Super Audio CD or Audio CD) to be  
preferentially played.  
When  
in stop mode, and then  
button on the remote is pressed  
RANDOM  
7 Specify track number to play  
7 All track repeat  
button is pressed,  
PLAY  
(Direct Search)  
the unit shuffles track order automatically and plays  
all the tracks in the shuffled order. The RNDM  
(random) indicator lights.  
When  
button on the remote is pressed,  
REPEAT  
” “ALLindicator will light up and all track repeat  
play begins.  
Specify track number with numerical buttons (0-9)  
on the remote  
This setting can be made when the tray is closed  
and there is no disc in the disc tray.  
The gap between tracks will be approximately 2  
seconds during random play.  
(example)  
To Return to Normal Play  
SOUND MODE  
q Press  
button on the player.  
3
1
3rd track : Press  
12th track : Press  
.
Press  
button two times. “ ” ALL”  
REPEAT  
The currently selected layer/area is displayed.  
If the Super Audio CD is selected  
If the Audio CD is selected  
and then press  
2
indicator will disappear, repeat mode will be off and  
it returns to normal play mode.  
To Exit from Random Play and Return to Normal Play  
STOP  
:
Super Audio CD  
(within approximately 1.5  
seconds).  
If the first pressed number is only in the digit of ones  
and not in the digit of tens, search begins  
approximately 0.5 second after.  
Press the  
button, and then press the  
: CD  
RANDOM button while playback is stopped.  
The RNDM (random) indicator goes off, and random  
play is released.  
REPEAT  
* If  
button is pressed when in program  
SOUND MODE  
w Press the  
button again to display  
mode, programmed tracks are played repeatedly.  
the layer/area to be played first, and then leave  
the setting for at least two seconds to register the  
setting for the start sound mode.  
7 One Track Repeat  
If  
buttons on the main unit or  
button  
If a wrong number is pressed  
Press correct number again.  
Press  
button on the remote two times.  
REPEAT  
Caution  
on the remote are Pressed during Random Play  
It jumps to the next track of the shuffled order.  
, 1indicators will light and the track will be  
* Start sound mode has a memory retention function  
where the settings remain stored and unchanged  
even when the disc is changed or the power is  
turned off.  
played repeatedly.  
* If you specify a track number that doesnt exist on  
the disc, the indicator returns to the display shown  
prior to this operation.Please specify a correct track.  
If  
,
buttons on the main unit or  
To Exit from One Track Repeat  
,
buttons on the remote are Pressed during  
Press  
button. “ ” 1indicator will  
REPEAT  
* At the time of shipment, the sound mode is set to  
Super Audio CD.  
Random Play  
Search will be done only in the current track. Search  
does not go to the previous or next track.  
disappear, repeat mode will be off and it returns to  
normal play mode.  
7 Skipping to the previous or next  
track (Track Skip)  
7 A-B Repeat  
To listen to a track posterior to the current track  
To Listen to Random Play Repeatedly  
Press  
buttons on the main unit or  
Press  
button on the remote once during  
AB  
REPEAT  
q Press  
button on the remote at your chosen  
button on the remote the number of times you want  
to proceed tracks.  
random play. Every time the order will be shuffled.  
If button is pressed during program  
play, the programmed tracks will be shuffled.  
starting point. The A-Bindicator will blink.  
RANDOM  
AB  
w
Press  
button again at your chosen end  
point. A-B” “ indicator will light up and the  
chosen section will be played repeatedly.  
To listen to a track prior to the current track  
Press  
buttons on the main unit or  
button on the remote go back to the beginning of the  
current track. Then press buttons on the  
main unit or button on the remote the number  
To Exit from A-B Repeat  
AB  
indicator will disappear, A-B repeat mode will be off  
and it returns to normal play mode.  
Press  
button on the remote. A-B” “  
of times you want to go back.  
* A-B repeat cannot be done when random play is  
going on.  
PLAYINGYOUR FAVORITE  
PARTS OF A DISC (SEARCH)  
* The end point (where A-Bindicator is blinks) of  
the repeat section cannot be set before the time of  
the starting point (where A-B” “ indicator light  
up) of the repeat section.  
If  
,
buttons on the main unit or  
buttons on the remote are kept pressing  
,
during playback, track search begins. Release the  
button when the point you want to listen to gets close.  
* No sound is output during the search operation.  
10  
 
To Check the Programmed Tracks  
SCROLL/RECALL  
QUICK REPLAY  
PLAYING TRACKS IN A SPECIFIC  
SEQUENCE (PROGRAM PLAY)  
Press the  
button on the remote  
Q&A  
Q.REPLAY  
control during the program or when the program is  
When  
button is pressed during  
stopped (PROGlights up).  
playback, the unit goes back to the amount of time  
set by the MENU and starts playback from there.  
You can arrange and play tracks in a specific  
sequence. Up to 30 tracks to be played can be  
programmed.  
How many tracks can be programmed?  
Up to 30 tracks can be programmed for  
program play.  
SCROLL/RECALL  
Every time press  
button, the  
programmed tracks will be displayed one after the  
other in order.  
* Playback that goes beyond the track is not allowed.  
Also, when the total time of the track being played  
is shorter than the time set for quick replay, or when  
the playback time is shorter than the time set for  
(Example:To program the 7th track after 15th  
track in a disc with 25 tracks)  
Can I listen to program play repeatedly?  
To Delete a Programmed Track  
Press  
button once. “ ” ALL”  
REPEAT  
Q.REPLAY  
quick replay, if  
button is pressed, the  
q
Press  
button in stop mode when program  
CANCEL  
indicator will light and program play will  
be repeated.  
RNDM TRK  
PROG  
A
ALL  
B
AMS  
track will be goes back to the start of that track and  
playback is started from there.  
has been made (When PROGindicator is  
lighting up).  
1
TOTAL SING REMAIN  
SACD  
TEXT  
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19 20  
STEREO  
Can I shuffle the programmed track order?  
w
Every time press  
tracks are deleted in order from the last track  
programmed.  
Also, the deleted tracks track number indicator  
will disappear.  
button, the programmed  
To Set Quick Replay Time  
q If a disc is loaded in the disc tray, eject the disc  
CANCEL  
Press  
button in stop mode.  
RANDOM  
PROGRAM  
q Press  
button on the remote in stop  
mode. PROGindicator will light up and it goes  
to program mode.  
and close the tray.  
w Press the  
button on the remote control.  
MENU  
Lights up  
RNDM TRK  
PROG  
A
ALL  
B
AMS  
SEARCHING YOUR FAVORITE  
TRACKS (AMS (AUTOMATIC MUSIC  
SCAN) PLAY)  
To Clear Whole Program  
1
TOTAL SING REMAIN  
SACD  
Press  
STOP button two times while in program  
TEXT  
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19 20  
STEREO  
play. In the stop mode, press  
STOP button once.  
Program can also be cleared by pressing  
key to open the disc tray.  
w Choose a track to be programmed with numeric  
OPEN/CLOSE  
This feature is convenient to search where your  
favorite track is.  
ENTER  
e Press the  
button on the remote control  
buttons on the remote.  
while Quick Replay is displayed (approx. 3  
seconds).The current time setting appears on the  
display. (The default setting is 10 seconds.)  
If AMS button on the remote is pressed in stop  
mode, the PLAY 3indicator will blink and the  
beginnings of all the tracks will be played for 10  
seconds each starting from the first track.  
Also, if the AMS button is pressed during playback,  
the PLAY indicator 3will blink, and the program  
will jump to the next track after a display time of  
approximately 10 seconds.  
To Add Tracks to Program  
(Example: The 15th track is chosen and its  
Tracks can be added to the end of program when  
program is remaining (PROGindicator is lighting  
up) and in stop mode.  
length is 4min30sec)  
Lights up  
However tracks cannot be added to the program  
when the RNDM (random) indicator is lighting up.  
RNDM TRK  
PROG  
A
ALL  
B
AMS  
1
TOTAL SING REMAIN  
SACD  
TEXT  
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19 20  
STEREO  
* Please be careful about the following matters.  
r Use the  
or  
button to set the time. (10  
Light up  
seconds/20 seconds/30 seconds)  
1st track programmed  
Only the numbers of  
programmed tracks light up  
When programming 1st through 9th tracks in a  
disc that has over 10 tracks by using numeric  
buttons. For instance, programming the 3rd track  
after programming the 1st track, press 3 button  
more than approximately 1.5 seconds after 1  
button is pressed. When a program is finalized,  
the time is updated.  
RNDM TRK  
PROG  
A
ALL  
B
AMS  
1
TOTAL SING REMAIN  
SACD  
t After making the setting, press the  
button  
MENU  
e With the sequence described in step w above,  
program another track. Repeat that sequence to  
program all the tracks you want.You can program  
up to 30 tracks.  
twice. The display returns to the normal display.  
TEXT  
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19 20  
STEREO  
y The time setting is retained even when the power  
When you find a song that you want to listen to, press  
PLAY  
is turned off.  
the AMS button again or press the  
button.  
PLAY indicator will light up constantly and normal  
playback will begin from the current track.  
(Example:The 7th track is chosen and total  
length of 7th and 15th is 7min50sec)  
Likewise, when programming a track at 10th or  
after. For example, to program 13th track, press  
3 button within approximately 1.5 seconds after  
1 button is pressed.  
Caution:  
* When there is no key input for about 4 seconds  
during this series of operations, the setting will be  
configured to the conditions at that time and the  
display will return the time display.  
* If the AMS button is pressed after the tracks are  
programmed, only the programmed tracks are  
played by AMS.  
Lights up  
When programming a track in a disc that has less  
than 9 tracks. For instance, to program the 5th  
track after 4th track has been programmed, press  
5 button more than approximately 0.5 second after  
4 button is pressed.  
RNDM TRK  
PROG  
A
ALL  
B
AMS  
1
TOTAL SING REMAIN  
SACD  
TEXT  
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19 20  
STEREO  
Total programmed number  
Total playing time of  
programmed tracks  
PLAY  
r Press  
button to starts playback in  
programmed order.  
* When 21 or more tracks are programmed,  
light up instead of the track number indicator.  
will  
11  
 
TIMER PLAY  
ABOUT THE TEXT INFORMATION  
DISPLAY  
TROUBLE SHOOTING  
This unit can perform timer play by cooperating with  
your audio timer.  
Connect this units power cord to the audio timers  
power socket and the timers power cord to power  
outlet.  
If you think a malfunction has occurred, first check  
the points listed below. The problem is likely to have  
been caused by a simple operational error or a  
connection problem. If the problem cannot be  
corrected even after carrying out the following checks,  
consult your dealer or nearest Marantz sales office  
or service counter.  
Remote control operation is not possible.  
The following items of text information in Super Audio  
1. Is the transmitter of the remote control unit  
(RC8001SA) pointed correctly at the remote  
sensor on the front of the player (this unit)?  
Or is there an obstruction between the transmitter  
and the remote sensor?  
TEXT  
CD discs can be displayed by pressing  
on the remote.  
button  
Nevertheless, which items of information are  
recorded depends on discs so some information may  
not be displayed. This unit skips unrecorded  
information to display.  
* For connection to audio timer and its operation,  
please refer to the instruction manual of your audio  
timer.  
2. Are the batteries in the remote control unit  
exhausted?  
The disc fails to rotate.  
During playback  
3. Is there another strong light (from a window, etc.)  
striking the Super Audio CD players remote  
sensor?  
Audio Timer  
1. Is the mains lead plugged in properly?  
2. Is the POWER switch ON?  
TEXT  
When  
button is pressed on the remote, Track  
Titleof the currently playing will be displayed.  
3. Is the disc placed in the correct position on the  
disc tray?  
AC IN  
In Stop Mode  
A Super Audio CD cannot be played.  
TEXT  
Each time  
button on the remote is pressed,  
4. Is the disc placed properly with the label side  
facing up?  
1. Is the disc scratched, dirty or warped?  
text information will be displayed in the following  
order.  
2. Is the amplifiers input selector set to digital?  
5. Is the disc dirty?  
* Digital audio signal will not be output when a Super  
Audio CD is played.  
6. Is the disc scratched?  
7. Is the disc warped?  
Time Display  
Album Title  
Album Artist  
3. Is the disc a Super Audio CD multi-channel only  
disc? (This unit does not support Super Audio  
CD multi-channel.)  
The disc is rotating but no sound is heard.  
Setting method of Timer Play  
1. Are the amplifier and speakers connected  
properly?  
A CD-R/CD-RW disc cannot be played.  
q Press POWER switch to turn ON the power.  
1. Is the disc placed upside down?  
2. Is the amplifier switch ON?  
2. Is the disc contains properly written TOC?  
3. Is the amplifiers function or selector switch set to  
CDor AUXor such (to whatever you have  
connected this unit to)?  
w Insert the disc to be played.  
3. Is the recorded information in an audio (CD-DA)  
format?  
* In timer play mode, tracks are played normally.  
This unit can display 12 characters in one time. If  
information is longer than 12 characters, the  
display will scroll right to left.  
4. Is the amplifiers volume control set at the  
e Set the audio timer.  
minimum level?  
A specific CD cannot be played  
Copy control CDs (CDs with copy guard) are  
special discs that do not comply with current CD  
standards. Marantz cannot guarantee the ability  
to play such discs on your CD player.  
When normal CDs can be played without a  
problem and problems occur only when playing  
these special discs, it is not a problem with this  
unit.  
This unit can display only alphabets, numeric  
numbers and symbols. Chinese and Japanese  
characters cannot be displayed. If information is  
in Chinese and Japanese characters, the unit  
displays nothing.  
The disc stops in mid-operation.  
The sound drops out or noise is heard.  
1. Is the disc dirty?  
2. Is the disc scratched?  
3. Is the disc warped?  
* In the case of a CD-R or CD-RW disc, this problem  
may occur when the conditions under which its data  
was originally written were substandard or when  
the quality of the disc itself is poor.  
Please ask the seller of the copy control CD for  
detailed information regarding copy control CDs.  
The unit makes a clicking sound when the tray  
closes  
* This condition may occur in Mixed-Mode CDs, CD  
Extra, and other discs that have CDDA format mixed  
with other data.  
Noise may also be heard momentarily when  
skipping tracks.  
This is the adhesion click of the clamper for  
securing the disc. This does not cause any  
problem in using the unit.  
While the disc is spinning, a spinning sound  
is heard or a slight vibration occur.  
Depending on the disc, a spinning sound may  
occur or the unit may vibrate slightly due to disc  
eccentricity or such. This is not a problem with  
this unit.  
12  
 
I Dimensions  
SPECIFICATIONS  
Super Audio CD  
Audio CD  
Audio Characteristics  
Analog output  
Channels  
2channels  
2Hz 100kHz  
2Hz 50kHz (-3dB)  
112dB  
2channels  
2Hz 20kHz  
2Hz 20kHz  
100dB  
Frequency range  
Frequency characteristics  
Dynamic range  
THD (1kHz)  
0.0010%  
0.0020%  
wow & flutter  
Precision of quartz  
Precision of quartz  
Output level  
Unbalanced  
2.3V RMS stereo  
2.3V RMS stereo  
Digital output  
output level (cinch JACK)  
output level (optical)  
0.5Vp-p (75)  
-19dBm  
Optical Readout System  
Laser  
Wave length  
AlGaAs  
650nm  
AlGaAs  
780nm  
Signal format  
1-bit DSD  
16-bit linear PCM  
13 5/16 (339)  
17 5/16 (440)  
Sampling frequency  
2.8224MHz  
44.1kHz  
SUPER AUDIO CD PLAYER SA8001  
RNDM  
PROG  
TRK  
A
ALL  
B
AMS  
SING  
1
TOTAL  
REMAIN  
SACD  
Power Supply  
TEXT  
1
2
3
4
5
6
7
8
9
10  
11  
1
2
1
3
1
4
1
5
1
6
1
7
1
8
1
9
2
0
STEREO  
D
I
S
P
L
A
Y
O
F
F
T
E
X
T
T
I
M
E
S
O
U
N
D
M
O
D
E
PPOOWWEERR ONN//OOFFFF  
U Version....................................................................................................... AC 120V 60Hz  
Power Consumption ...................................................................................................... 20W  
3/16  
(4.5)  
Cabinet, etc.  
13 3/16 (334.5)  
Dimensions (Width × Height × Depth) ................................................... 440 × 128 × 339mm  
Net weight .................................................................................................................... 8.0kg  
Operating temperatures ................................................................................. +5°C ~ +35°C  
Operating humidity ............................................................................ 5 ~ 90% (without dew)  
Unit : inch (mm)  
Accessories  
Remote control unit (RC8001SA) .................................................................................... 1  
AAA (R03) Batteries......................................................................................................... 2  
AC Power cord ................................................................................................................. 1  
Audio cable ...................................................................................................................... 1  
Remote connection Cable................................................................................................ 1  
Users Guide .................................................................................................................... 1  
Warranty Card.................................................................................................................. 1  
Specifications subject to change without prior notice.  
13  
 
You can find your nearest authorized distributor or dealer on our website.  
U.S.A.  
Marantz America, Inc.  
Marantz Europe B.V.  
1100 Maplewood Drive, Itasca, IL 60143, U.S.A.  
EUROPE  
P.O. Box 8744, 5605 LS Eindhoven, The Netherlands  
is a registered trademark.  
Printed in China  
02/2006 00M29AK851250 mzh-g  
 

Learning Resources Baby Toy LER 0351 User Manual
Lennox Hearth Furnace G43UF User Manual
Lenoxx Electronics Cassette Player 9190M User Manual
LG Electronics DVD Player XBV713 User Manual
Linksys Network Router WRT54G3G VN User Manual
Makita Sander BO5012 User Manual
Maytag Refrigerator MBL1956KES3 User Manual
Maytag Washer Dryer MET3800TW1 User Manual
Melissa Microwave Oven 651 040 User Manual
Memorex Two Way Radio MK1970 User Manual