English
Français
EsPaÑOl
AV PreTuner
AV8802
Quick Start Guide
Guide de démarrage rapide
Guía de inicio rápido
What’s In the Box
Quick Start Guide
FM indoor antenna
Owner’s Manual
AM loop antenna
Safety Instructions
Sound calibration
microphone
Notes on radio
Sound calibration
microphone stand
Warranty
(for USA/for CANADA)
Remote control unit
Cable labels
R03/AAA batteries
Pre Tuner
External antennas
for Bluetooth/
Wireless
connectivity
Power cord
The supplied Sound calibration microphone stand is convenient for use when
performing Speaker Calibration. Using your own tripod or the supplied Sound
calibration microphone stand enables settings to be automatically configured to
the optimum listening environment, providing exceptionally high performance.
2
Important: External Antennas
The removable external antennas are required for both
Bluetooth and Wireless network connectivity. Please make
sure to connect the antennas before attempting to use the
Bluetooth or Wi-Fi features of the AV8802.
n Connecting the external antennas for
Bluetooth/Wireless connectivity
For each of the two antennas:
1) Place the antenna evenly over the antenna terminal
located at the upper left or right corner of the rear panel.
2) Turn the antenna clockwise until it is fully connected. Do
not over tighten.
3) Rotate the antenna upwards for the best possible
reception.
q
w
e
3
Setup
There are three steps to the setup
process.
Installing batteries in the
remote control unit
1
Installing batteries in the remote control unit
1
Connecting the Pre Tuner, Power Amplifier
and your TV
2
Following the On-Screen Setup Assistant
3
R03/AAA batteries
4
Connecting the Pre Tuner, Power Amplifier and your TV
2
2.1) Place the Pre Tuner and Power
Amplifier near your TV and connect
the power cord.
TV
TV
Pre Tuner
Power cord
(supplied)
Pre Tuner
Connect to household
power outlet
(AC 120 V, 60 Hz)
Power Amplifier
5
2.2) Connect to the network.
Wired LAN
Wireless LAN
When connecting cables (wired connection), connect a LAN
cable between your Pre Tuner and your network router.
When connecting to wireless LAN (Wi-Fi), follow the
instructions in “Connecting the external antennas for
Bluetooth/Wireless connectivity” and connect the antennas.
Internet
Modem
Internet
Modem
Router with
access point
To WAN side
To LAN port
To WAN side
Router
6
2.3) Connect the Pre Tuner to your TV 2.4) Turn on the TV.
with an HDMI cable.
HDMI IN
ꢀ$5&ꢁ
HDMI cable
TV remote control unit
HDMI OUT
MONITOR
ꢀ$5&ꢁ
2.5) Select the appropriate HDMI input
on your TV.
HDMI
TV/
VIDEO
or
INPUT
Pre Tuner (Rear panel)
TV remote control unit
7
2.6) Turn on the Pre Tuner.
2.7) Verify the connection.
• Verify that you can see this screen on your TV.
• Press X to turn on the Pre Tuner.
AV Preamp Setup Assistant
Please select a language...
English
Español
Français
If this screen is not displayed, please go back and
retry the steps again in the recommended sequence.
8
Following the On-Screen Setup Assistant
3
The Setup Assistant will walk you through connecting and
configuring your Power Amplifier and components to your
Marantz Pre Tuner. Please use the remote control and
follow the on-screen instructions.
AV Preamp Setup Assistant
Please select a language...
English
Español
Français
9
Owner’s Manual
Please reference to the Owner's Manual for more details about the setup and operation of the Pre Tuner and its features.
n Online Version
n Printable Version
Enter the following URL into your web browser:
Access the print version of the owner's manual from the
included CD-ROM or select the “PDF Download” link
from the Online Version.
Insert the disc into
your PC.
1
Online Manual
Contents
English
WEB Manual
Overview
Connections
Playback
Settings
Tips
AAVVPr8e 8Tu0ne2r
Follow the screen or double click on
the PDF file.
2
Appendix
PDF
PDF Download
AV Pre Tuner
Copyright 2014 D&M Holdings Inc. All Rights Reserved.
c
10
D&M Holdings Inc.
Printed in Japan 5411 11150 00AM
|